
Drain de tranchée de 6 pouces
Le système de 6 pouces peut déplacer une quantité essentielle d’eau et vous faire économiser de l’argent. Vous pouvez connecter les canaux bout à bout pour créer une ligne (système de drainage linéaire). Il n'est pas nécessaire d'utiliser un adaptateur si votre projet nécessite un virage à 90 degrés, car les canaux sont dotés de connexions à 90 degrés intégrées de chaque côté. Plusieurs options de grilles sont disponibles. Classes de charge proposées : A, B et C
What is the length of each trench drain?
All Vodaland trench drains are 1-meter (3.28ft) lengths. Trench drains can be connected together for longer runs, and units can be cut to match specific sizing requirements.
Is the 6” width an internal or external dimension?
The 6” category and all other width categories represent the internal width of channel, and the same applies to the depth sizes shown for each channel. External dimensions vary for each type of channel, and customers can view external dimensions through the spec drawings provided on each product page.
How do I connect the trench drains together?
We design all of our trench drain channels to be connectable with each other via male-to-female connections. Depending on model, your trench drain may either “click” together, or simply fit together for connection. It is very important that all connections are silicone sealed.
How do I connect piping?
For piping, Vodaland designs our channels with outlets options on the bottom, sides, and ends. These outlets can be attached to 4” Schedule 40 PVC with an adapter we sell separately. If other piping is to be used, we recommend connecting them to the outlets via rubber couplings which are sold externally.
Do these need to be encased in concrete?
Vodaland recommends that all our trench drains be encased in concrete for best reliability. Certain scenarios may not allow for the use of concrete, and in those cases customers may change the recommended installation method at their own discretion.
What is the max/min temperatures that the plastic channel can handle?
Our plastic trench drains are suitable for temperatures between -40 to +45 degrees Celsius. Our installation method accounts for seasonal temperature changes through the use of expansion joints.
Do your trench drain channels have slope?
Our trench drain channels are neutral, meaning no slope. For most small-to-medium scale projects, slope isn’t fully necessary. For those who require a slope, you can create a cascade system of multiple channel depths to create an artificial slope for your run.
Available load classes for our 6" Base plastic trench drain:
Load Class A - pedestrian foot traffic
Load Class B - Residential vehicle traffic (no parking) and yard equipment
Load Class C - Commercial vehicle traffic, residential vehicle parking, buses, and medium duty commercial equipment.
For more info on load classes click on the link:
https://vodaland.ca/pages/load-classes
Benefits of 6 inch systems...
If a 4” system is not enough and an 8” system is too big for your project, then our 6” trench drain system may be a good alternative for you. This option features the same benefits you’ll find in our 4” and 8” trench drains. The 6” system can move an essential amount of water and save you money. You can connect channels end-to-end to create a line (linear drainage system). There’s no need for an adapter if your project requires a 90-degree turn because channels have built-in 90-degree connections on each side. Based on the type of grate—galvanized steel, plastic, or cast iron—we offer 3 different load classes: A, B, and C (from pedestrian loads to heavy-duty loads). Our plastic grate is B-load-class rated (vehicle loads), and it’s a great option for residential driveway/parking.
Outlet connection options...
Our 6” trench drain systems provide you with 4” and 6” outlet connections on the bottom, as well as 4” cut-out outlet connections on end caps. This gives you more freedom for connecting your PVC.
We offer 3 different materials for grating with our 6" Basic PolyMax channels:
Grate material | Loads Class | Rust resistance |
---|---|---|
Plastic | A (Pedestrian) B (Light Vehicle) | No rust |
Galvanized Steel | A (Pedestrian) | Zinc coating protection |
Cast Iron | C (Heavy Vehicle) | May rust over a long time |
Appelez-nous pour plus d'informations ou pour passer une commande !
Notre équipe de service client et notre équipe de vente sont toujours là pour vous aider.
(905) 238-1771FAQ
Voyons combien de canaux vous avez besoin.
Déterminons la superficie en pieds carrés de votre projet.
N'oubliez pas d'arrondir les dimensions des forfaits en pieds carrés. Nous vous recommandons d'acheter 10 % de plus que votre superficie en pieds carrés pour garantir que les dimensions correspondent.
Voyons combien de grilles géographiques vous aurez besoin pour votre projet.
N'oubliez pas qu'il est parfois judicieux d'ajouter une unité supplémentaire à votre commande si vous effectuez des coupes ou des garnitures dans votre installation !
- Le choix d'une sélection entraîne l'actualisation d'une page entière.
- Appuyez sur la touche espace puis sur les touches fléchées pour faire une sélection.